| A050-SS |
 |
Price: $3.72
|
Type A Adapters are typically used with Type D Couplers, but can also be used with Type B and C Couplers or DC (Dust Cap) of the same size.
1/2" Female Thread
1/2" Male Adaptor |
|
|
|
|
| B050-SS |
 |
Price: $5.62
|
Type B Couplers are typically used with Type F Adapters but can also be used with Type A and E Adapters and DP (Dust Plug) of the same size.
1/2" Male Thread
1/2" Female Coupler |
|
|
|
|
| C050-SS |
 |
Price: $5.99
|
Type C Couplers are typically used with Type E Adapters but can also be used with Type A and F Adapters and DP (Dust Plug) of the same size.
1/2" Hose Barb
1/2" Female Coupler
Still the most popular item for homebrewers.
( For the suction side of Chugger pumps a larger ID Can be attained by using a C Special below or a 1/2" Hose Barb WIDE ID with a D050-SS, see below pumps.) |
|
|
|
|
| C Special |
 |
Price: $7.67
|
Widest ID Possible
Perfect for suction side of Chugger pump
Type B050-SS with no threads,with a hose barb instead.
(Trial Product)
|
|
|
|
|
| D050-SS |
 |
Price: $5.85
|
Type D Couplers are typically used with Type A Adapters but can also be used with Type E and F Adapters and DP (Dust Plug) of the same size.
1/2" Female Thread
1/2" Female Coupler
|
|
|
|
|
| E050-SS |
 |
Price: $3.69
|
Type E Adapters are typically used with Type C Couplers, but can also be used with Type B and D Couplers or DC (Dust Cap) of the same size.
1/2" Hose Barb
1/2" Male Adaptor |
|
|
|
|
| F050-SS |
 |
Price: $3.92
|
Type F Adapters are typically used with Type B Couplers, but can also be used with Type C and D Couplers or DC (Dust Cap) of the same size.
1/2" Male Thread
1/2" Male Adaptor
|
|
|
|
|
| DC050-SS |
 |
Price: $4.99
|
Dust Caps are used with Type A, E and F Adaptors to seal the end of the connection.
|
|
|
|
|
| DP050-SS |
 |
Price: $2.03
|
Dust Plugs are used with Type B, C and D Couplers to seal the end of the connection.
|
|
|
|
|
|
|
|
|
| 2 piece ball valve |
 |
|
|
2 piece Ball Valve
Stainless Steel 316.
Click drop down to select size.
|
|
|
|
|
| 3 piece Ball Valve |
 |
|
|
3 piece Ball Valve
Stainless Steel 316.
Click drop down to select size.
|
|
|
|
|
|
|
|
|
| Hex Nipple |
 |
Price: $4.00
|
1/2" Male Thread by 1/2" Male Thread
316 Stainless Steel
|
|
|
|
|
| Close Nipple |
 |
Price: $3.50
|
1/2" Close Nipple
316 Stainless Steel
|
|
|
|
|
| 1/2" Coupling |
 |
Price: $3.50
|
1/2" Female Thread by 1/2" Female Thread.
316 stainless Steel
|
|
|
|
|
| 1/2" Coupling-Machined |
 |
Price: $3.50
|
1/2" Female Thread by 1/2" Female Thread, machined coupling
316 stainless Steel
|
|
|
|
|
|
|
|
|
| 1/2" Elbow |
 |
Price: $4.00
|
1/2" Female Thread by 1/2" Female Thread
316 Stainless Steel
|
|
|
|
|
| 1/2" Tee |
 |
Price: $4.00
|
1/2" Female Thread by 1/2" Female Thread by 1/2" Female Thread.
316 Stainless Steel
|
|
|
|
|
|
|
| 1/2" Lock Nut |
 |
Price: $0.76
|
SPECIAL SALE
1/2" Lock Nut
Stainless Steel 316
This is NPT tapered thread threaded.
( One side will thread the other only a little) |
|
|
|
|
| PFT44 Turbine Meter & Display |
 |
Price: $199.95
|
LOW COST BATTERY POWERED FLOW METER, PERFECT FOR HOME BREWING APPLICATIONS!!!
PFT44 Turbine Meter & Display
· ½” NPT connection
· Flow Totalizing up to 9999.9 gallons
· Flow Rate Display from 0.4 to 6.6 gallon/min
· Battery Operated, 2x AA Batteries (included)
· Low Battery Power Alert (Audio/Visual)
· Automatic Data Storage During Power Failure
· Vertical or Horizontal Installation
· Max Pressure: 6.0 bar
· Temperature Rating: 0-212 F |
|
|
|
|
|
|
| Chugger SS INLINE |
 |
Price: $139.00
|
Chugger Brew Pump -Magnetic Drive with Base 115 volt, 1/20 HP with 55" cord WITH PLUG - 1/2"
x 1/2" Threaded connections, Stainless Steel pump head with Polysulfon Impeller
|
|
|
|
|
| Chugger SS-C |
 |
Price: $145.00
|
Chugger Brew Pump -Magnetic Drive with Base 115 volt, 1/20 HP with 55" cord WITH PLUG - 3/4"
x 1/2" CENTER INLET Threaded connections, Stainless Steel pump head with Polysulfon Impeller.
Please Note that this Pump has a 3/4" Inlet, So a reducer will be required to use the 1/2" camlocks.
|
|
|
|
|
| Chugger PL Inline |
 |
Price: $106.07
|
Chugger Brew Pump -Magnetic Drive with Base 115 volt with 55 inch cord with plug - 1/2" x 1/2"
Threaded connections, Polysulfon Plastic pump head.
|
|
|
|
|
| C050-SS-Wide ID |
 |
Price: $7.67
|
Test item
A C050-SS with a wide ID
Consistes of a D050-SS and a HB050-SS (Hose barb with wide ID)
( Recommended for Suction side of Chugger pumps)
|
|
|
|
|
| C050-SS-5/8" |
 |
Price: $7.67
|
Test Item
C050-SS with 5/8" hose barb
Consistes of two parts a D050-SS and a 5/8" hosebarb
(Recommended for suction side of Chugger pump)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| A075-SS |
 |
Price: $4.28
|
Type A Adapters are commonly used with Type D Couplers. However, they can also be used with Type B and C Couplers or DC (Dust Cap) of the same size.
3/4" Female Thread
3/4" Male Adaptor
|
|
|
|
|
| C075-SS |
 |
Price: $6.91
|
Type C Couplers are commonly used with Type E Adapters. Though, they can also be used with Type A and F Adapters and DP (Dust Plug) of the same size.
3/4" Hose Barb
3/4" Female Coupler
|
|
|
|
|
| D075-SS |
 |
Price: $7.47
|
Type D Couplers are typically used with Type A Adapters but can also be used with Type E and F Adapters and DP (Dust Plug) of the same size.
3/4" Female Thread
3/4" Female Coupler
|
|
|
|
|
| E075-SS |
 |
Price: $4.60
|
Type E Adapters are normally used with Type C Couplers, but can also be used with Type B and D Couplers or DC (Dust Cap) of the same size.
3/4" Hose Barb
3/4" Male Adaptor |
|
|
|
|
| F075-SS |
 |
Price: $4.26
|
Type F Adapters are usually used with Type B Couplers, but they can also be used with Type C and D Couplers or DC (Dust Cap) of the same size.
3/4" Male Thread
3/4" Male Adaptor |
|
|
|
|
| 3/4" Food Grade Gasket |
 |
Price: $0.75
|
3/4" Food Grade Gasket, Silicone. (clear color, large ID)
*Please note that these gaskets do not come with 3/4" couplers |
|
|
|
|
