|
|
|
|
| 12V DC pump |
 |
Price: $59.95
|
- 12V DC pump in sturdy red steel carry case with handle and switch.
- Direct drive vane pumping unit with bypass valve.
- Complete with 6.5 ft long battery lead & croc clips.
- Maximum flow 10.5 GPM.
- 3/4" NPT female ports.
- Cast Iron head.
- Maximum run time 30 minutes
- 7.7 pounds.
- 2800 rpm.
- Current 11 Amps
- For use with Diesel only
|
|
|
|
|
| Carry 2000/12V |
 |
|
|
DC fuel transfer pumps
Displacement, self-priming, rotary electric vane pumps for the transfer of diesel fuel equipped with by-pass valve.
Powerful, dependable and economical, they are available with 12 and 24-volt direct current motors.
Thanks to their compact size, ease of installation, dependability and safety, these pumps are used as the primary system on earth-moving machinery and on mobile fuel pumps on vehicles or in construction yards.
Technical specifications - 10 GPM.
- Current 18 Amps.
- 3/4" threaded connectors on the pump body.
- Cast iron pump body finished with anti-corrosion paint.
- Vane pump with sintered steel rotor and acetal resin vanes.
- By-pass valve incorporated in the pump body.
- Direct current brush motor with permanent magnet stator.
- Motor protection grade IP55.
- Used in intermittent service with 30-minute work cycles.
- Pump attachment support bracket.
- Switch box and fuse carrier.
- Complete with power cables and pincers for connection to terminal strips.
- Click on picture to link to specifications (PDF)
|
|
|
|
|
| Battery Kit 2000/12V |
 |
|
|
Fuel transfer pump unit
This is a portable unit for transferring Diesel fuel, fitted with a pump (Carry 2000), complete as a kit with hose and nozzle.
Thanks to its small size, reliability and simple installation, it is specially useful when fuel must be transferred or dispensed safely having only battery power on hand, as in construction sites, on boats and in agriculture.
Performance Specifications
• Power supply: 12 V DC - 24 V DC.
• Flow rate: 10 GPM.
• Suction capacity: up to 2 meters.
• Duty cycle: 30 min.
|
|
|
|
|
| Battery Kit Panther DC |
 |
Price: $280.00
|
| | High Flow AC fuel transfer pumps
Made to complete the Panther range for transferring diesel fuel, these pumps are of the rotary vane type, self-priming, with high flow rate and easy operation and installation.
Besides featuring an integrated bypass valve and suction filter, they are also equipped with a mechanical seal that ensures a high standard of reliability even at low operating temperatures.
The version 24/12 can be used with both tension.
Compact, safe and reliable, they can be fitted to earthmoving machines, mobile dispensers on motor vehicles and fixed dispensers in case only battery power is available.
Technical specifications
• Pump body in cast iron with anti-corrosion treatment and painting.
• Support base.
• Pump of the blade type with sintered steel rotor and acetalic resin vanes.
• Mechanical seal.
• Incorporated bypass valve.
• D.C. motor with brushes and permanent magnets.
• Connector block with ON/OFF switch.
• Protection fuse.
• Degree of protection IP55.
• Filter 100 µ incorporated in pump body, easy access for maintenance.
• Threaded 1” coupling directly on pump body. overload protection.
• 15 GPM |
|
|
|
|
|
| PF-12V-FRC |
 |
|
|
Temporarily out of stock 12 Volt DC Pump Complete with Hose, manual nozzle and suction tube.15 GPM Iron rotor Automatic bypass valve Built-in strainer 2" threaded base for tank openings Machined carbon vanes Pump may be padlocked Complete with 3/4" elbow for discharge hose connection |
|
|
|
|
| Viscomat DC |
 |
Price: $245.00
|
DC oil pump
A new and complete range of pumps for transferring and delivering oil, operated by direct current motors.
PIUSI products respond perfectly to market demand.
The pumps are especially designed for transferring oil from drums, or mobile tanks, in situations where electricity or pneumatic connections are not available.
The motor is equipped with a direct current battery so that oil transfer or delivery operations can always be carried out.
Use the pressure-switch version to deliver oil without the inconvenience of having to start or stop the pump.
Thanks to their compactness and easy installation these pumps can be used for equipping mobile oil pumps on vehicles or used independently with battery equipped trolleys.
They can also be used as primary installations when carrying out oil transfer or handling operations in yards, ports, aboard vehicles or boats.
Performance
• Flow rate 1,2 gal/min
• Operating pressure from 5 (70 psi)
• Oil viscosity up to 1800 cP (2000 cSt)
• Duty cycle 30 min
• Noise less than 65 Db - suitable for Biodiesel
- 1/2" threaded connections
|
|
|
|
|
| Battery Kit for Oil/biodiesel |
 |
Price: $346.00
|
DC oil pump (Viscomat DC)
A new and complete range of pumps for transferring and delivering oil, operated by direct current motors.
PIUSI products respond perfectly to market demand.
The pumps are especially designed for transferring oil from drums, or mobile tanks, in situations where electricity or pneumatic connections are not available.
The motor is equipped with a direct current battery so that oil transfer or delivery operations can always be carried out.
Use the pressure-switch version to deliver oil without the inconvenience of having to start or stop the pump.
Thanks to their compactness and easy installation these pumps can be used for equipping mobile oil pumps on vehicles or used independently with battery equipped trolleys.
They can also be used as primary installations when carrying out oil transfer or handling operations in yards, ports, aboard vehicles or boats.
Performance
• Flow rate 2 gal/min)
• Operating pressure from 5 to 10 bar (70 to 140 psi)
• Oil viscosity up to 1800 cP (2000 cSt)
• Duty cycle 30 min
• Noise less than 65 Db |
|
|
|
|
| Bi-Pump |
 |
|
|
DC fuel transfer pumps
Displacement, self-priming, rotary electric vane pumps for transferring diesel fuel, characterized by high flow rates.
All pumps are equipped with by-pass valve.
Powerful, dependable and economical, they are available in 12 and 24-volt versions.
Thanks to their compact size, ease of installation, dependability and safety, these pumps are used as the primary system on earth-moving machinery and on mobile fuel pumps on vehicles or in construction yards.
Technical specifications
• Cast iron pump body finished with anti-corrosion paint.
• Vane pump with sintered steel rotor and acetal resin vanes.
• By-pass valve incorporated in the pump body.
• Direct current brush motor with permanent magnet stator.
• Motor protection grade IP55.
• Used in intermittent service with 30-minute work cycles.
• Pump attachment support bracket.
• Integrated on/off switch.
• Flanged 1" connectors.
• Available with power cables, incorporated fuses and pincers for connection to terminal strips.
• 22.5 GPM - Click on picture for specifications (PDF)
|
|
|
|
|
|
|
|
|
